Why Every Gladiator Needs LED Taillights
Studies show LED taillights improve brake reaction time by 0.3 seconds – crucial for avoiding rear-end collisions. Winjet's premium LED taillights transform your Jeep Gladiator (2020-2024 models) with:
✔ 300% Brighter Output (vs factory halogens)
✔ Dynamic Sequential Turn Signals - Smooth sweeping animation
✔ Military-Grade Housing - IP67 waterproof & dustproof
✔ Plug-and-Play Installation - No wiring modifications needed
✔ DOT/SAE Certified - 100% street legal in all 50 states
What Makes Winjet Taillights Special?
1. Advanced LED Technology
- 18 high-intensity LED chips per light
- Instant illumination (0.1s response time)
- 50,000+ hour lifespan (5x longer than halogens)
2. Smart Sequential Lighting
- Three-stage turn signal animation
- Adjustable brightness via included controller
- Emergency flasher mode included
3. Rugged Construction
- Aerospace-grade polycarbonate lenses
- Reinforced aluminum heat sinks
- Vibration-resistant mounting system
Simple 3-Step Installation
Step 1: Remove Factory Lights
- Open tailgate and remove 4x T30 Torx screws
- Disconnect wiring harness (no tools needed)
Step 2: Install Winjet LEDs
- Connect plug-and-play harness (colors match OEM)
- Secure with included anti-vibration bolts
Step 3: Test & Enjoy
- Verify: Brake lights ✅ Turn signals ✅ Reverse lights ✅
- Adjust sequential speed if desired
Performance Comparison
| Feature | Winjet LEDs | Factory Halogens |
|---|---|---|
| Brightness | 1,800 lumens | 600 lumens |
| Response Time | 0.1 seconds | 0.5 seconds |
| Power Draw | 15W/side | 45W/side |
| Warranty | 1 years | 1 year |
Gladiator Owner FAQs
Q: Will these work with my 2022 Gladiator Mojave?
A: Yes! Compatible with all 2020-2024 Gladiator trims (Sport, Overland, Rubicon, Mojave).
Q: How's the visibility in heavy rain?
A: IP67 rating means they perform perfectly even in torrential downpours.
Q: Is professional installation required?
A: 95% of customers install in under 30 minutes using our video guide.